Futaba R7003SB FASSTest HV receiver

Compact, lightweight R7003SB 2.4 GHz FASSTest receiver with integral telemetry transmitter.

• Smaller, only 7g, lighter 3 /18 - channel 2.4GHz FASSTest S.BUS-Receiver with full range and integrated Telemetry transmitter.
• Ultra-slim for models with narrow fuselages.
• With the S-BUS system for up to 18 channels, making it suitable for all models from mini-helicopters to large-scale aircraft.
• Normal PWM-output
• The 3 PWM-Servo channels outputs are divided in 7 groups of outputs Port 1 and 2, whereby the output allocation may be freely selected.
• S.BUS output Up to 18 of the new, programmable S-BUS servos or peripheral devices such as gyros,
• Flybarless systems or speed controllers can be attached in series directly to this output.
• One feed cable for all channels.
• No cable „spaghetti“, and reduced weight.
• All standard servos can be connected to receivers with an S.BUS PWM adapter.
• It does not get any simpler.
• High Response
• Switchable output speed of the control pulse for digital servos, 6.3 ms instead of 16 ms,
• which leads to a still shorter reaction time.
• Aerial Diversity
• The 2 Aerial Diversity system continuously checks the signal level at both aerial inputs and switches over in a split second to the stronger signal with no transition period.

Telemetry

• S.BUS2 devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted.
• The receiver‘s integral transmitter sends the telemetry data present at the S.BUS2 socket to the FASSTest transmitter, where the data are displayed on-screen or generated in audible form.
• Alternatively, the data can be transmitted to a separate Telemetry-Box.
• When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.

Power

• A further voltage range from 3.7…7.4 V nominal voltage, when using 7.4 LiPo-Batteries for receiver power, all connected servos must possess the appropriate voltage capability.
• The receiver does not feature an internal servo voltage limiter for the high voltage servo voltage.

Recommended accessory:

• F1001100 „Extra Voltage“ connecting lead with fuse.

Specification:

• Frequency band 2.4 – 2.4835 GHz
• Spot frequencies 36
• Channel count 18
• Channel spacing 2048 kHz
• Transmission system FASSTest
• Voltage 3.7...7.4 Volt (4 - 5 Nx, 2 LiFe, 1 - 2 LiPo)
• Current 50 mA
• Dimensions 37.4 x 22.5 x 9.3 mm
• Aerial length 14 cm
• Weight approx. 7,2 g

Set contents
Including adapter for the „Extra Voltage“ connecting lead at Port 2.