LiPoWatch

LiPoWatch

The cell monitoring protects your impulse battery against deep unloading and stores at the same moment as a Datalogger the tension of every separate cell.

The LiPoWatch is a cell monitoring for up to 15 cells (15S) LiPo and LiFePo of battery. He supervises every cell of the battery stack and can do while remaining an adjustable threshold the impulse so that the cells are not unloaded deeply.
The externally connectable buzzer (ord. no 2610) announces remaining tension threshold and other mistakes.

In addition, the LiPoWatch records the tension all connected cells separately and serves with it as a Datenlogger for the monitoring of the battery.
The flights of a whole weekend can be recorded

A red LED by every cell connection makes possible a quick view which cell has released the undervoltage message or another warning.

About our UniDisplay all measured values of the LiPoWatch can be selected directly at the airfield and be considered.
As well the minimum values of the last measuring row can be read.
Also a live announcement is possible.
All settings as for example the memory rate can be programmed by display.

The evaluation of the data takes place uncomplicated with the known software LogView or the GNU DataExplorer.

On the basis of a low weight and the compact size the LiPoWatch can be used nearly in every area.
With only 11gs he is suitable as well for the control of a 2S, 3S or 14S Lipo

The LiPoWatch is also able to do this:

• Monitoring and measurement from 2s to 15s of battery with Datenlogger
• Regulation / disconnection of the impulse with adjustable parameters direct announcement of mistakes of a cell with own LED
• Connection for a temperature sensor (ord. no 2220)
• Connection for an external signal buzzer (ord. no 2610)
• Recording the internal temperature
• Recording the Servo-impulses of the receiver and the Servo-impulses to the regulator enormous internal data memory for almost 75000 readings sentences (dependent on the cell number)
• Memory rates of 4 measurements per second to 1 measurement all 10 seconds make possible a recording duration from about 200 hours (dependent on the cell number)
• Power supply automatically by the impulse battery
• Start of the recording by lapse of time
• Manual recording start and recording stop about inserted key of current status is signalled about a LED per cell and three general LEDs
• direct(straight) considering of the measured values live or recorded with our UniDisplay (ord. no 2400)

Specification:

• Tension range: 0 to 60 V (65 V) at every entrance
• Power supply: directly from the impulse battery (4 V - 65 V)
• External connections: 1 times Servoimpuls of the receiver 1 times Servoimpuls exit to the regulator 1 times temperature sensor (-40 °C to + 125 °C) of 1 times more external detector (peeps)
• Dimensions: 37 x 42 x 12 mms
• Weight: 11g